Volt-zu-Watt-Rechner
Wirkleistung (W) aus Spannung mit Strom (A) DC/AC (cos φ) oder Widerstand (Ω) im ohmschen DC: P = V² ÷ R. Spannung zuerst; Strommodus wie Ampere-zu-Watt.
P = U × I und AC-Formen — wie Ampere-zu-Watt, Spannung zuerst.
Spannung an der Last.
DC: Laststrom. AC: RMS-Leiterstrom.
Inhalt
Warum Volt allein keine Watt ergeben
Nur Spannung reicht nicht. Es fehlt Strom oder Widerstand (ohmsches Modell).
Mit U und I: P = U × I (DC), AC mit cos φ, Drehstrom mit √3.
Mit U und R: P = U² ÷ R.
Ergänzt Ampere-zu-Watt und Watt-zu-Volt.
Formeln
Aus Spannung und Strom
DC
P (W) = U (V) × I (A)
Wirkleistung.
AC einphasig
P (W) = URMS × IRMS × cos φ
RMS-Größen.
AC dreiphasig (symmetrisch)
P (W) = √3 × UL-L × I × cos φ
Leiter-Leiter-RMS.
Ohmscher DC (U und R)
P (W) = (U (V))² ÷ R (Ω)
Aus P = U × I und I = U ÷ R.
Kurzübersicht
| Methode | Schaltung | Spannung | I oder R | cos φ | Leistung | Beispiel |
|---|---|---|---|---|---|---|
| U + I | DC | 12 V | 10 A | — | 120 W | P = U × I |
| U + I | AC 1φ | 120 V | 10 A | 0,9 | 1.080 W | AC-Last |
| U + I | AC 3φ | 415 V | 10 A | 0,9 | 6.462 W | UL-L |
| U + R | DC Ω | 24 V | 6 Ω | — | 96 W | 24² ÷ 6 |
FAQ
Ja — gleiche Formeln, Spannung zuerst.
DC-Leistung in R bei Spannung U.
Als Volt eingeben (z. B. 0,012).
P = √3 × UL-L × I × cos φ.